XL
    L
    XS
    M
    S
    XXL
    Apparel Type

    Jacket Size Calculator with Layering Room

    By , Marketing Specialist, Tailor Size Guide

    This jacket size calculator adds layering room only when you need it. Enter your chest or bust and choose what you'll wear underneath. For thick layers, it adds 4 inches, the low end of Barbour's advice to add 4 to 6. For a shirt or thin sweater, it adds nothing. You'll get your size on Barbour's chart, with The North Face, Columbia and Next alongside it.

    Jacket size calculator

    Enter your chest to get your size.

    Sized on your chest as measured. Barbour recommends adding 4 to 6 in if you'll wear thick layers underneath, so switch the option above if you will.

    Approximate. From Barbour's men's guide, with The North Face, Columbia and Next for comparison. Reviewed November 2026. Brands cut differently, so check the chart for the piece you're buying.

    How it works

    1

    Start here

    Take your chest or bust with a soft tape, over thin clothing or bare skin.

    2

    Enter it

    Type the numbers into the calculator. Inches or cm both work.

    3

    Get your answer

    Use the result as your starting size, then check it against the chart for the piece you're buying.

    Men's jackets: Barbour body measurements, top of each size

    SizeChest (cm)Waist (cm)Sleeve (cm)
    XS917684
    S968186
    M1028689
    L1079191
    XL1129694
    XXL117101102

    Women's jackets: Barbour body measurements

    SizeBust (cm)Waist (cm)Hips (cm)
    UK 6836792
    UK 8887297
    UK 109377102
    UK 129882107
    UK 1410387112
    UK 1610892117
    UK 1811397122
    UK 20118102127
    UK 22123107132

    Frequently Asked Questions

    Do I need to size up a jacket for layering?

    Brands disagree. Barbour recommends adding 4 to 6 in to your usual size if you'll layer. The North Face says most of its winter coats already allow for layers. So check the jacket you're buying.

    What does fit mean on a jacket?

    The North Face says a slim fit can go over base layers or light mid-layers, a standard fit over mid-layers, and a relaxed fit over heavy mid-layers. So the fit tells you how much it can go over.

    Should I measure over a shirt?

    Measure over a thin shirt. The North Face says to measure around the widest part of your chest, roughly 2 cm under your armpits.

    Sources

    1. Barbour size and fit guidesBody measurements, and its advice to add 4 to 6 in for layering.
    2. The North Face size chartsChest and hips by letter size, and what each fit can be layered over.
    3. Columbia size and fit guideMen's, women's and unisex charts, with letter equivalents.
    4. Next men's sizing guideChest and waist by letter size, and shorts lengths.

    Related calculators

    For brand owners

    Run a fashion store on Shopify?

    Add a size calculator to your product pages, with per-product size charts and instant fit recommendations for your shoppers.